saronix nth / nch series saronix crystal clock oscillator technical data 3.3v, tri-state, hcmos 141 jefferson drive ? menlo park, ca 94025 usa 650-470-7700 800-227-8974 fax 650-462-9894 ds-159 rev c01 symmetry: rise and fall times: logic 0: logic 1: load: period jitter rms: 0.5 mhz to 106.25 mhz frequency stability: frequency range: 20, 25, 50 or 100 ppm over all conditions: calibration tolerance, operating temperature, input voltage change, load change, 30 day aging, shock and vibration. temperature range: operating: storage: 0 to +70c or -40 to +85c, see part numbering guide -55 to +125c supply voltage: recommended operating: 3.3v 10% supply current: 20ma max, 0.5 to 30 mhz 25ma max, 30+ to 50 mhz 30ma max, 50+ to 80 mhz 35ma max, 80+ to 106.25 mhz actual size description a crystal controlled, low current, low jitter and high frequency oscillator with precise rise and fall times demanded in networking applications. the tri-state function on the nth enables the output to go high impedance. device is pack- aged in a 14 or an 8-pin dip compatible resistance welded, all metal grounded case to reduce emi. output drive: 40/60% max @ 50% v dd 45/55% max to 70 mhz max 4ns max 0.5 to 50 mhz, 20% to 80% v dd 3ns max 50+ to 80 mhz 1.5ns max 80+ to 106.25 mhz 10% v dd max 90% v dd min 50 pf, 0.5 to 50 mhz 30pf, 50+ to 70 mhz 15pf, 70+ to 106.25 mhz 8ps max hcmos mechanical: shock: solderability: terminal strength: vibration: solvent resistance: resistance to soldering heat: mil-std-883, method 2002, condition b mil-std-883, method 2003 mil-std-883, method 2004, conditions a & c mil-std-883, method 2007, condition a mil-std-202, method 215 mil-std-202, method 210, condition a, b or c environmental: gross leak test: fine leak test: thermal shock: moisture resistance: mil-std-883, method 1014, condition c mil-std-883, method 1014, condition a2 mil-std-883, method 1011, condition a mil-std-883, method 1004 applications & features adsl, dsl ds3, es3, e1, sts-1, t1 ethernet switch, gigabit ethernet fibre channel controller mpeg network processors voice over packet 32 bit microprocessors tri-state output on nth hcmos compatible available up to 106.25 mhz grounded, all metal, full or half size packages, gull wing leads available plastic smd available, see separate data sheet output waveform t r t f cmos logic 1 80% v dd 50% v dd 20% v dd logic 0 symmetry
saronix nth / nch series saronix crystal clock oscillator technical data 3.3v, tri-state, hcmos 141 jefferson drive ? menlo park, ca 94025 usa 650-470-7700 800-227-8974 fax 650-462-9894 all specifications are subject to change without notice. ds-159 rev c01 symmetry 0 = 40/60% max, 0 to 70c 2 = 40/60% max, -40 to 85c a = 45/55% max, 0 to 70c, 70 mhz max c = 45/55% max, -40 to 85c, 70 mhz max package details part numbering guide 5.08 .200 max .46.08 .018.003 15.24.13 .600.005 max 13.0 .510 pin 7 gnd pin 14 +3.3 vdc pin 8 output max 0.91 .036 full size package pin 1 tri-state - nth n/c - nch nth 0 8 0 c 3 - 40.0000 nth = tri state, hcmos compatible nch = pin 1 n/c, hcmos compatible note a: c l includes probe and fixture capacitance *( ) indicates pin numbers for half-size package test circuit pin 1 input logic 1 or nc logic 0 or gnd pin 8 (5) output oscillation high impedance tri-state logic table (nth only) example pn: nth080c3 - 24.0001 required input levels on pin 1: logic 1 = 2.2v min logic 0 = 0.8v max frequency (mhz) 3.3v supply package 0 = full size, thru-hole 9 = half size, thru-hole k = full size, gull wing j = half size, gull wing n = half size, gull wing, spanked leads ma m power supply v m test point v dd out oscillator pin 14 (8) pin 8 (5) pin 1 (1) * pin 7 (4) gnd tri-state input (nth only) c l = 50 pf, 0.5 to 50 mhz c l = 30 pf, 50+ to 70 mhz c l = 15pf, 70+ to 106.25 mhz (note a) 21.0 .825 max 6.350.51 0.250.02 max (4) glass insulators 7.75 .305 saronix xtal osc standard marking format ** includes date code, frequency & model denotes pin 1 denotes pin 1 saronix 1.7 .067 6.0 .236 120 120 120 13.0 .510 max 7.62.20 .300.008 pin 5 output pin 8 +3.3 vdc 1.5 .059 pin 1 tri-state - nth n/c - nch pin 4 gnd 7.62.20 .300.008 .46.08 .018.003 6.350.51 0.250.02 5.08 .200 max 0.91 .036 max max 13.0 .510 half size package standard marking format ** includes date code, frequency & model ** exact location of items may vary frequency range 3 = 0.5 to 6 mhz 6 = 6+ to 24 mhz 8 = 24+ to 106.25 mhz stability tolerance c = 100ppm b = 50ppm a = 25ppm, 0 to +70 c only aa = 20ppm, 0 to +70 c only, 80mhz max
|
